UL 707 – Industrial Sanitizer Liquid

UL-707 is our Industrial Sanitizer Liquid which helps keep schools, nursery homes, hospitals, and all kinds of services clean & germ free. With 24 hour protection and next to now harmful odours

$25.00

We use HDPA Plastic which is most ecofriendly plastic in the industry.

Category:

These products are biodegradable and plant based ingredients. Usage instructions included with the product. All my products are made in the USA.

UL 707 Sanitizer Disinfectant

Safety & Hazard

UL 707 Santizer

IDENTIFICATION

Product identifier  
Product Name UL-707
Other means of identification  
SDS # ALLIED-011
UN/ID No UN1760
Recommended use of the chemical and restrictions on use  
Recommended Use Cleaning agent.
Details of the supplier of the safety data sheet  
Supplier Address

Allied International

6700 Caballero Blvd.

Buena Park, CA 90620

Phone: 714-736-9811

 
Emergency telephone number  
Emergency Telephone INFOTRAC 1-352-323-3500 (International)

1-800-535-5053 (North America)

HAZARDS IDENTIFICATION

Appearance  Red Physical state  Liquid Odor  Mild
Classification
Skin corrosion/irritation Category 1  Sub-category B
Serious eye damage/eye irritation Category 1
Signal Word
Danger 
Hazard statements
Causes severe skin burns and eye damage
Precautionary Statements – Prevention
Do not breathe dusts or mists
Wash face, hands and any exposed skin thoroughly after handling
Wear protective gloves/protective clothing/eye protection/face protection
Precautionary Statements – Response
Immediately call a POISON CENTER or doctor
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
Immediately call a POISON CENTER or doctor
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower
Wash contaminated clothing before reuse
IF INHALED: Remove person to fresh air and keep comfortable for breathing
Immediately call a POISON CENTER or doctor
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting
Precautionary Statements – Storage
Store locked up
Precautionary Statements – Disposal
Dispose of contents/container to an approved waste disposal plant

COMPOSITION/INFORMATION ON INGREDIENTS

Chemical name CAS No Weight-%
n-alkyl dimethyl ethylbenzyl ammonium chloride 68956-79-6 1-5
Alkyl dimethyl benzyl ammonium chloride (C12-18) 68391-01-5 1-5
**If Chemical Name/CAS No is “proprietary” and/or Weight-% is listed as a range, the specific chemical identity and/or percentage of composition has been withheld as a trade secret.**

FIRST AID MEASURES

Description of first aid measures
General Advice Immediately call a poison center or doctor/physician.
Eye Contact Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center or doctor/physician.
Skin Contact Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.
Inhalation Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center or doctor/physician.
Ingestion Rinse mouth. Do NOT induce vomiting.
Most important symptoms and effects, both acute and delayed
Symptoms Causes severe skin burns and eye damage.
Indication of any immediate medical attention and special treatment needed
Notes to Physician Treat symptomatically.

FIRE-FIGHTING MEASURES

Suitable Extinguishing Media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

  Unsuitable Extinguishing Media Not determined.
Specific Hazards Arising from the Chemical

Not determined.

Protective equipment and precautions for firefighters

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures 
  Personal Precautions Use personal protective equipment as required.
Environmental precautions 
  Environmental precautions See Section 12 for additional Ecological Information.
Methods and material for containment and cleaning up 
  Methods for Containment Prevent further leakage or spillage if safe to do so.
  Methods for Clean-Up Keep in suitable, closed containers for disposal.

HANDLING AND STORAGE

Precautions for safe handling
Advice on Safe Handling Handle in accordance with good industrial hygiene and safety practice. Use personal protection recommended in Section 8.
Conditions for safe storage, including any incompatibilities
Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place.
Incompatible Materials None known based on information supplied.

EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure Guidelines This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies
Appropriate engineering controls
Engineering Controls Ensure adequate ventilation, especially in confined areas.
Individual protection measures, such as personal protective equipment

 

Eye/Face Protection Wear eye/face protection. Refer to 29 CFR 1910.133 for eye and face protection regulations.
Skin and Body Protection Refer to 29 CFR 1910.138 for appropriate skin and body protection.
Respiratory Protection Refer to 29 CFR 1910.134 for respiratory protection requirements.
General Hygiene Considerations Handle in accordance with good industrial hygiene and safety practice.

PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties

 

Physical state Liquid
Appearance Red Liquid
Odor Mild
Color Red
Odor Threshold Not determined
   
Property Values 
Remarks  • Method 
pH 7-8
Melting point / freezing point Not determined
Boiling point / boiling range Not determined
Flash point Not determined
Evaporation Rate Not determined
Flammability (Solid, Gas) Not determined
Flammability Limit in Air  
  Upper flammability or explosive limits Not determined
 
  Lower flammability or explosive limits Not determined
 
Vapor Pressure Not determined
Vapor Density Not determined
Relative Density Not determined
Water Solubility 100%
Solubility in other solvents Not determined
Partition Coefficient Not determined
Autoignition temperature Not determined
Decomposition temperature Not determined
Kinematic viscosity Not determined
Dynamic Viscosity Not determined
Explosive Properties Not determined
Oxidizing Properties Not determined

STABILITY AND REACTIVITY

Reactivity 
Not reactive under normal conditions.
Chemical stability

Stable under recommended storage conditions.

Possibility of hazardous reactions

None under normal processing.

Conditions to Avoid

Keep out of reach of children.

Incompatible materials

None known based on information supplied.

Hazardous decomposition products

None known based on information supplied.

TOXICOLOGICAL INFORMATION

Information on likely routes of exposure 
  Product Information
  Eye Contact Avoid contact with eyes.
  Skin Contact Avoid contact with skin.
  Inhalation Do not inhale.
  Ingestion Do not ingest.
Component Information
Chemical name Oral LD50 Dermal LD50 Inhalation LC50
Alkyl dimethyl benzyl ammonium chloride (C12-18)

68391-01-5

= 850 mg/kg  ( Rat ) = 2300 mg/kg  ( Rabbit )
Symptoms related to the physical, chemical and toxicological characteristics 
  Symptoms Please see section 4 of this SDS for symptoms.
Delayed and immediate effects as well as chronic effects from short and long-term exposure 
  Skin corrosion/irritation Causes severe skin burns.
  Serious eye damage/eye irritation Causes severe eye damage.
  Carcinogenicity Based on the information provided, this product does not contain any carcinogens or potential carcinogens as listed by OSHA, IARC or NTP.
Numerical measures of toxicity

 

The following values are calculated based on chapter 3.1 of the GHS document 
  Oral LD50 6,296.30  mg/kg
  Dermal LD50 14,882.40  mg/kg

ECOLOGICAL INFORMATION

Ecotoxicity  
The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Component Information

Not available

Persistence/Degradability

Not determined.

Bioaccumulation

There is no data for this product.

Mobility

Not determined

Other Adverse Effects

Not determined

DISPOSAL CONSIDERATIONS

Waste Treatment Methods
  Disposal of Wastes Disposal should be in accordance with applicable regional, national and local laws and regulations.
  Contaminated Packaging Disposal should be in accordance with applicable regional, national and local laws and regulations.

TRANSPORT INFORMATION

Note Please see current shipping paper for most up to date shipping information, including exemptions and special circumstances.
DOT
  UN/ID No UN1760
  Proper Shipping Name Corrosive liquid, n.o.s. (Quaternary ammonium chloride)
  Hazard class 8
  Packing Group II
IATA
  UN number UN1760
  Proper Shipping Name Corrosive liquid, n.o.s. (Quaternary ammonium chloride)
  Transport hazard class(es) 8
  Packing Group II
IMDG
  UN number UN1760
  Proper Shipping Name Corrosive liquid, n.o.s. (Quaternary ammonium chloride)
  Transport hazard class(es) 8
  Packing Group II

REGULATORY INFORMATION

International Inventories  
 
Chemical name TSCA TSCA Inventory Status DSL/NDSL EINECS/ELINCS ENCS IECSC KECL PICCS AICS
Alkyl dimethyl benzyl ammonium chloride (C12-18) X ACTIVE X X X X X X X
n-alkyl dimethyl ethylbenzyl ammonium chloride X ACTIVE X X   X   X X
 Legend:
   TSCA  – United States Toxic Substances Control Act Section 8(b) Inventory 
   DSL/NDSL  – Canadian Domestic Substances List/Non-Domestic Substances List 
   EINECS/ELINCS  – European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances 
   ENCS  – Japan Existing and New Chemical Substances 
   IECSC  – China Inventory of Existing Chemical Substances 
   KECL  – Korean Existing and Evaluated Chemical Substances 
   PICCS  – Philippines Inventory of Chemicals and Chemical Substances  
   AICS  – Australian Inventory of Chemical Substances 
US Federal Regulations 
CERCLA

This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355).

SARA 313

Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA).  This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372

CWA (Clean Water Act)

This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42)

US State Regulations  
California Proposition 65

This product does not contain any Proposition 65 chemicals.

U.S. State Right-to-Know Regulations

This product does not contain any substances regulated under applicable state right-to-know regulations

OTHER INFORMATION

NFPA 
Health Hazards

Not determined

Flammability

Not determined

Instability

Not determined

Special Hazards

Not determined

HMIS 
Health Hazards

Not determined

Flammability

Not determined

Physical hazards

Not determined

Personal Protection

Not determined

Issue Date: 15-Mar-2021
Revision Date: 30-Mar-2021
Revision Note: New format
Disclaimer

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. 

Reviews

There are no reviews yet.

Be the first to review “UL 707 – Industrial Sanitizer Liquid”

Your email address will not be published. Required fields are marked *